Permanent WHITE LED Christmas Lights Outdoor LEDs Tape Lighting Strip 1-64 feet

Description

Permanent WHITE LED Christmas Lights Outdoor LEDs Tape Lighting Strip 1-64 feet.
This is the permanent solution for Christmas lighting! When they are on they are extremely bright and beautiful. When they are off they are virtually invisible so peel off the back, stick to the edge of your home and silicone along the top and bottom of the strip. These lights are rated at 50,000 hours so they will last you 15-25 years easily.
Power c
onsumption is under 1.5 watts per foot.
To extend plug to a more convenient place simply add 18 gauge wire
anyw
here by splicing in then seali
ng it up.
POWER SUPPLY INCLUDED to plug directly into the wall outlet. Power Supplies are different for different lengths.
Once you get longer than 40 ft there will be a large power supply that will require you to go both directions from the power to get the full length
( ---------LEDs----------power-----------LEDs----------- )  This means you
will
go both ways from the power so plea
se be prepared to have power in the middle
.
If you would rather wire to 12V this LED strip has red and black wire coming out to wire straight to 12V battery by simply cutting the female plug off.
IMP
ORTANT FOR LONG
-TERM I
N
STALLA
TION
These
s
trips are silicone filled to protect the LEDs from water all along the top and sides of the strip. To fully protect the strip long term you will need to run a bead of silicone along both sides of the strip and all around any connection, plug and both ends of the strip. If you do not do this there is risk of the LEDs shorting out. Being a 12V light there is no safety issue. This suggestion is simply to protect your LEDs long term.
Why buy MY LEDs??
1. The board color.
Instead of "yellow board" my LEDs are on a much nicer and more durable white board with an oil brushed surface.
The wire running through this is 100% copper instead cheap short lasting iron as most LED strips are.
2. The board material quality.
"A" is my LED strip with two layer board completely resistant to heat and protected from short circuiting. (Very Common for cheap LED strips)
3. Silicone Filled NOT Epoxy (for Waterproof Only)
Waterproof Strips are filled with Real Silicone instead of epoxy glue that becomes yellow and faded over time.  The real Silicone is also the only way ensure a consistent color temperature over time.
4. Chip Connection
My LEDs have gold thread running through to connect each LED and chip together rather than copper thread. This will ensure a long lasting connection for LED to chip.
LED strip lights can be used for many applications such as:
Accent lighting
signage
under cabinet lighting
cove lighting
bar top lighting
club lights
TV backlighting
under counter lighting
task lighting
cabinet lighting
display case lighting
and more!
"For God so loved the world, that he gave his only Son, that whoever believes in him should not perish but have eternal life."
John 3:16 ESV